Cox Floor Mounted Column Shower System

Cox Floor Mounted Column Shower System

Neon Flex LED Strip Colour Temperature Adjust - Top View

Neon Flex LED Strip Colour Temperature Adjust - Top View

neon Flex Led Strip Colour Temperature Adjust - Side View

Neon effect LED strip light with CCT 'Correlated Colour Temperature' output.  This strip LED can be adjusted from either 2200K, 2700K or 3000K warm white through to 6500K cool white and anywhere inbetween.  A single product which can have its colour output adjusted according to mood, time of day or application.

  • IP68 underwater rated casing with IP68 injection moulded connectors and end caps
  • Uniform neon light output 
  • 120° beam output
  • Adjustable white from 2200°K, 2700°K or 3000°K to 6500°K - white range to be specified at order
  • 3 year warranty
  • Dimmable with Dali, DMX, PWM
  • Side view light output - perpendicular flex to direction of light
  • Custom made to order in specified lengths - please contact us for purchase

 

SKU
NFS5050.120-11.5-24V.CCT
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Class III
Low voltage fitting, voltage below 50V.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
IP68 ingress protection
Dust tight, protected against permenant immersion in water under conditions specified by the manufacturer.
Recessed ceiling and wall installation
Recessed ceiling and wall installation.
Product for exterior application
Suitable for use both indoors and outdoors
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471

THE PROFILE

 

Our neon effect LED strip is the perfect solution for interior or exterior application where a high level of waterproofing is required. The IP68 rating of the product means that it can even be installed underwater and is safe for swimming pool application.  The product is entirely resistant to dust ingress and offers a high level of durability against solvents, saltwater and UV light.

The side view product is flexible in a perpendicular direction to the lens which means that it can be installed in applications where it must follow a certain radius as well as in straight lengths.

 CCT - ADJUSTABLE COLOUR TEMPERATURE

 

This particular neon strip is a CCT model or 'Correlated Colour Temperature'.  This means that the strip can be adjusted in colour temperature from 3000K all the way through to 6500K. Colour temperature is recorded in Kelvin.  The higher the Kelvin, the cooler the output.  Our useful colour temperature chart below will help guide you.

 

 

The product features a simple three cable connection design with a single + positive common and two negative cables for the 3000°K and the 6500°K chips.  The various colour temperatures are created by simply altering the intensity of the two chips and blending the colours together.  

 

CONNECTORS

 

Straight

Our standard end connector features a straight connection, directly into the end of the strip LED.  This connector is supplied with 600mm of cable as standard and is IP68 rated.  The opposite end is a simple injection moulded end cap.

When powering lengths that are greater than 10m, a double end connector of this type can be specified to allow a connection at both ends of the product.  This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 20m).

 

Right or Left

One option is to have the connection made on either the right or left hand side (right hand side pictured).  This connector is supplied with 600mm of cable and is IP68 rated.  The opposite end is a simple injection moulded end cap.

When powering lengths that are greater than 10m, a double end connector of this type can be specified to allow a connection at both ends of the product.  This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 20m).

 

Bottom

This connector type emerges from the underside of the strip LED.  This is ideal for applications where the end of the strip is visible and the power source is behind the strip.  This connector is supplied with 600mm of cable and is IP68 rated.  The opposite end is a simple injection moulded end cap.

When powering lengths that are greater than 10m, a double end connector of this type can be specified to allow a connection at both ends of the product.  This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 20m).

 

Jump

A jump connector allows two strip lengths to be connected to one another and keep an IP68 rating.  This connector is supplied with 300mm of cable.  The opposite end is a simple injection moulded end cap.

Multiples of this connection type are possible when connecting more than two lengths together.  The total length of the strips and cable must not exceed 20m if powered from both ends.

  

 

INSTALLATION

 

The neon side view product can be quickly and simply installed using one of the compatible aluminium mounting tracks or clips.  With a self-locking design, the extrusion can be screwed into position and then the strip LED is simply pushed into place.

Standard self-locking U channel - anodised aluminium - 50mm or 1m lengths

Self-locking U channel with cable housing - anodised aluminium - 50mm or 1m lengths

Self-locking U channel - stainless steel - 50mm lengths only (clips)

More Information
Height (mm) 21.00
Width (mm) 11.50
Weight (kg) 0.38
Light Element Type SMD LED 15W/m
Lens Angle 120°
Wattage 15 W / Metre
Input Voltage 24Vdc
IP Rating IP68
Dimmer Yes
LEDs Per Metre 120.00
CRI >90
Cutting Intervals (mm) 100.00
Operating Temperature Range (°C) -25 ~ +55 °C
Strip LED Type Flexible Neon

No Related Posts

Download as PDF Download as PDF
We found other products you might like!