Plutone TRM Spotlight

The Plutone spotlight range contains some of our most advanced LED technology.  The Plutone TRM is a powerful fitting featuring a 6.5 watt LED module. The Nichia™ LED chip produces a very high quality LED output with an average colour rendering index of 95. The spotlight is waterproof from both the front and rear and is available in various lens angles and colour temperatures.  The TRG model features an innovative FS SYSTEM fixing method which allows the product to be installed from the front of the panel and not the rear like many spotlights of this kind.  A simple key can be used to remove the product from the front for easy maintenance.

  • Interior & exterior spotlight with flange-less design
  • Excellent anti-glare properties with recessed LED source
  • Galvanised brass face, black painted
  • Custom finishes available on request
  • Tempered glass lens
  • Anodised aluminium heatsink
  • Multiple lens angles available
  • FS SYSTEM fixing method - no need to prefit to ceiling panels
  • Available in numerous white colour temperatures as well as red
  • CRI>90
From £124.99 £104.16
SKU
5294BLKLED*
SKU
5294BLKLED*
Class III
Low voltage fitting, voltage below 50V.
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
IP65 ingress protection
Dust tight, protected against water jets.
Recessed ceiling and wall installation
Recessed ceiling and wall installation.
Product for exterior application
Suitable for use both indoors and outdoors
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471

Heat Dissipation

-

Heat dissipation is key to the performance and longevity of LED lighting.  Our Power LED modules have been carefully designed to ensure that the heat is taken away from the LED chips and dissipated through the incorporated heat sink designed into the product housing.

Circuit board temperatures are closely monitored during the development phase of each product and appropriate heat dissipation can then be accurately calculated to ensure that product will continue to perform for many years.

 

Power Regulator

-

The 10-30Vdc power regulator is always a remote item on the power cable of the fitting.  This offers numerous advantages over alternative methods used by competitor brands.  Keeping the power regulator separate reduces heat build-up on the LED circuit board and therefore increases performance and longevity of the LEDs. 

Remote regulators can also be easily removed so that the product can be powered directly with the correct amperage, very useful for integration in some mains voltage applications.

 

Simple Frame-less Installation

-

The separate FS SYSTEM aluminium backing plate makes installation easy and swift.  The backing plate can be screwed to the back side of the installation panel, allowing the frame-less fitting to click into place from the front.  No need to pre-wire panels or fit lights in advance.  Maintenance is also quick and easy, a special key allows the fitting to be removed from the front without the need to remove ceiling panels.  

(Prometeo QRP pictured) 

Not All Cones Are Equal

-

A choice of lens angles is available for this product which means that the perfect output can be selected for any given project.  Selecting either standard, medium or narrow lenses can have a large effect on the overall lighting effect.

 

Photometric data coming soon...
More Information
Weight (kg)0.15
ManufacturerForesti & Suardi
InstallationRecessed
Light Element TypePower LED
Wattage6.5W
CRI>90
Input Voltage10-30Vdc
IP RatingIP65
DimmerYes
Bezel Size (mm)Ø46.00
Cut-out Size (mm)Ø46.00
Depth (mm)50.00
FinishBlack
Download as PDF Download as PDF