constant Current Silicone Super Long Neon Flex Led Strip - Side View

Super long neon effect LED strip light with single colour output.  Compact design with only 12mm x 12mm housing.

  • IP67 rated casing with IP67 connectors and end caps
  • Long lengths of up to 16 metres can be powered from a single end
  • High quality silicone housing offers excellent anti-yellowing characteristics.  The material is also non-corrosive and has a high acid resistance 
  • Uniform neon light output 
  • 120° beam output
  • White in choice of 3000°K, 4000°K, 5000°K or 6000°K
  • Available in static colours such as blue, red, green, yellow
  • 2 year warranty
  • Dimmable with Dali, DMX, PWM
  • Top view light output - flex in the same direction of light
  • Custom made to order in specified lengths
SKU
NFSL1220.120-12.24V.*
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Class III
Low voltage fitting, voltage below 50V.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
IP67 ingress protection
Dust tight, protected against temporary immersion in water.
Surface mounted ceiling and wall installation
Product for exterior application
Suitable for use both indoors and outdoors
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471

THE PROFILE

 

Our neon effect LED strip is the perfect solution for interior or exterior application where a high level of waterproofing is required. The IP67 rating of the product means that it can be installed in wet locations and is suitable for exterior use.  The product has a high resistance to dust ingress and offers a strong resistance against solvents, saltwater and UV light.

The side view product is flexible on a perpendicular axis to the lens which means that it can be installed in applications where it must follow a certain radius as well as in straight lengths.

Specification

The super long neon flex top view product is available in a large number of colour temperatures and power outputs.  The table below shows the variations available.

Colour Temperature (K) Cutting Unit (mm) CRI Power (W) Lumen (Lm/m) Effiency (Lm/W)

Max Length (m)

-Powered both ends

2100 +/- 100 50 >90

5

10

15

150

270

375

30

27

25

28

18

15

2400 +/- 100 50 >90

5

10

15

145

275

360

29

27.5

24

28

18

15

2700 +/- 100 50 >90

5

10

15

150

270

375

30

27

25

28

18

15

3000 +/- 100 50 >90

5

10

15

145

270

360

29

27

24

28

18

15

3500 + 200 / -100 50 >90

5

10

15

160

315

430

32

31.5

28.6

28

18

15

4000 + 300 / -200 50 >90

5

10

15

165

320

445

51.5

32

29.6

28

18

15

5000 + 300 / -200 50 >90

5

10

15

170

325

445

34

32.5

29.6

28

18

15

6000 + 400 / -100 50 >90

5

10

15

155

310

440

31

31

29.3

28

18

15

RED

50  

5

10

15

 

72

130

185

14.4

13

12

18

24

35

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Static colours and RGB versions are also available 

COLOUR TEMPERATURE

 

The neon LED strip is available in a number of colour temperatures to suit any project along side a choice of static colours. Colour temperature is important as it greatly affects the ambience of a space depending on whether a warmer or cooler output is chosen.  Colour temperature is recorded in Kelvin.  The higher the Kelvin, the cooler the output.  Our useful colour temperature chart below will help guide you.

 

 

 

CONNECTORS

Both injection moulded and DIY plastic end connectors are available for this type of neon flex strip light.  The product can be supplied with a straight end connection, bottom connection or side connection, all with an IP67 rating.

Injection-moulded end connection

Injection-moulded side connection

Injection-moulded bottom connection

DIY screw fit end connection

DIY screw fit side connection

DIY screw fit bottom connection

 

 

INSTALLATION

 

The neon top view product can be quickly and simply installed using one of the compatible aluminium mounting tracks or clips.  With a self-locking design, the extrusion can be screwed into position and then the strip LED is simply pushed into place.

Standard self-locking U channel - anodised aluminium - 50mm or 1m lengths

More Information
Height (mm) 20.00
Width (mm) 12.00
Weight (kg) 0.12
Light Element Type SMD LED
Material Silicone
Lens Angle 120°
Width (mm) 11.00
Height (mm) 20.00
Input Voltage 24Vdc
IP Rating IP67
Dimmer Yes
LEDs Per Metre 168.00
CRI >90
Cutting Intervals (mm) 50.00
Lumens Per Watt (Lm) 28.00 (average)
Luminous Flux (lm/M) 150 - 445
Operating Temperature Range (°C) -25 - +45
Strip LED Type Flexible Neon

No Related Posts

Download as PDF Download as PDF