Prometeo QRG Spotlight
The Prometeo QRG spotlight is the largest in the Promoteo frame-less range. The Nichia™ LED chip produces a very high quality LED output with an average colour rendering index of 95. The spotlight is waterproof from both the front and rear and is available in various lens angles and colour temperatures.
- Interior & exterior spotlight with frame-less design
- Galvanised brass face, painted
- Tempered glass lens
- Anodised aluminium heatsink
- Multiple lens angles available
- Available in numerous white colour temperatures as well as red
- CRI>90
SKU
5185BLKLED*
From £116.20 £96.83
Angle of light output can be manually adjusted.
Low voltage fitting, voltage below 50V.
Dust tight, protected against water jets.
Classified under photobiological risk group EN 62471
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling and wall installation.
Suitable for use both indoors and outdoors
 | Heat Dissipation-Heat dissipation is key to the performance and longevity of LED lighting. Our Power LED modules have been carefully designed to ensure that the heat is taken away from the LED chips and dissipated through the incorporated heat sink designed into the product housing. Circuit board temperatures are closely monitored during the development phase of each product and appropriate heat dissipation can then be accurately calculated to ensure that product will continue to perform for many years. |
Power Regulator-The 10-30Vdc power regulator is always a remote item on the power cable of the fitting. This offers numerous advantages over alternative methods used by competitor brands. Keeping the power regulator separate reduces heat buil-up on the LED circuit board and therefore increases performance and longevity of the LEDs. Remote regulators can also be easily removed so that the product can be powered directly with the correct amperage, very useful for integration in some mains voltage applications. | |
 | Simple Frame-less Installation-The separate aluminium backing plate makes installation easy and swift. The backing plate can be screwed to the back side of the installation panel, allowing the frame-less fitting to click into place. |
Photometric data coming soon...
| Weight (kg) | 0.210000 |
|---|---|
| Manufacturer | Foresti & Suardi |
| Installation | Recessed |
| Light Element Type | Power LED |
| Wattage | 5W |
| CRI | >90 |
| Input Voltage | 10-30Vdc |
| IP Rating | IP65 |
| Dimmer | Yes |
| Bezel Size (mm) | 72.00 x 72.00 |
| Cut-out Size (mm) | 72.00 x 72.00 |
| Depth (mm) | 55.00 |
| Finish | Black |
Download as PDF