UK Delivery Free Over £200
Plutone TG Spotlight

Plutone TG Spotlight

Plutone TP Spotlight

Plutone TP Spotlight

Plutone TM Spotlight

A connoisseur's LED downlight with anti-glare design, high colour rendering and choice of lens angles.

 

The Plutone spotlight range contains some of our most advanced LED technology.  The Plutone TM is a small yet powerful fitting featuring a powerful 6.5 watt LED module. The Nichia™ LED chip produces a very high quality LED output with an average colour rendering index of 95. The spotlight is waterproof from both the front and rear and is available in various lens angles and colour temperatures.

  • Interior & exterior spotlight with chrome plated bezel
  • Excellent anti-glare properties with recessed LED source
  • Galvanised brass face, chrome plated
  • Custom finishes available on request
  • Tempered glass lens
  • Anodised aluminium heatsink
  • Multiple lens angles available
  • Available in numerous white colour temperatures as well as red
  • CRI>90

 

SKU
5291CLED*
From £121.19 £100.99
Class III
Low voltage fitting, voltage below 50V.
IP65 ingress protection
Dust tight, protected against water jets.
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling and wall installation
Recessed ceiling and wall installation.
Product for exterior application
Suitable for use both indoors and outdoors

Class Leading Waterproof Spotlight

The Plutone spotlight range features the latest Nichia™ LED chip technology with a colour rendering index (CRI) of over 95.  Available in a number of different lens angles and colour temperatures, the Plutone model offers a very high-end downlight solution for those seeking the very best. 

Product Drawing

The Plutone spotlight has a deeper recess depth than other low voltage fittings in our range.  This is caused in part by the anti-glare recessed light source, which sits deep within the light body, but also by the larger machined aluminium heat sink on the rear of the fitting.  The size and performance of this heatsink has been carefully calculated in order to ensure that the LEDs operate at the optimal temperature for ultimate performance and longevity.

The product is secured in place using the spring clips featured on the back of the body.  To fit the product, simply make the electrical connection, retract the springs and insert the fitting into the cut-out.  Release the springs carefully and allow the fitting to be pulled into position within the hole cut-out.  This spring fit method offers an anti-vibration solution and a fast removal of the product for maintenance.

Separate Power Regulation

Our fittings offer a 10-30Vdc input.  This is designed to make installation very straight forward for 12 or 24Vdc circuits such as those found on board a yacht.  The 30Vdc upper limit also provides a level of security if a voltage spike were to occur.  The separate voltage regulator mounted on the cable of the fitting regulates this input voltage and feeds the luminaire with the current required depending on the circuit board used.  For those looking to fit the luminaires to a mains voltage 220-240 Vac circuit, a choice can be made between running the fitting on a 12Vdc or 24Vdc constant voltage power supply or, alternatively, powering the fitting directly with current following the safe removal of the regulator.  The provides the best possible flexibility for those choosing our fittings, allowing them to be integrated in a wider variety of lighting schemes and powered accordingly.

Colour Rendering Index

Colour rendering index, more commonly referred to as CRI, is a quantitive measure of the ability of a light source to display the true colours of various objects in comparison to a natural light source such as daylight.  The CRI of a light source does not indicate the colour of the light, this is referred to by the correlated colour temperature of a product commonly in Kelvin.  The highest possible CRI of a luminaire is 100, which would be given to a fitting with a light source of the same spectrum as daylight.

Our Nichia™ chip fittings, have a published CRI of >90.  In reality, the average CRI of our fittings has been laboratory tested at 95.  This means that our LED down lights will bring out the very best in the fabrics, veneers and other finishes that they illuminate, revealing close to their true colours.  The fittings become a key part of the interior design. 

Photometric Data

Narrow - 26

Narrow - 26°

Standard - 39

Standard 39

Elliptical - 43-24

Elliptical - 43-24°

More Information
Weight (kg) 0.170000
Manufacturer Foresti & Suardi
Installation Recessed
Light Element Type Power LED
Wattage 6.5W
CRI >90
Input Voltage 10-30Vdc
IP Rating IP65
Dimmer Yes
Bezel Size (mm) Ø58.00
Cut-out Size (mm) Ø44.00
Depth (mm) 51.00
Finish Chrome
Download as PDF Download as PDF