Apply Discount Code
UK Delivery Free Over £200
ATX1 Polished Stainless Steel Accumulator Tank, 0.5 Litres
Polished stainless steel accumulator tank for automatic pumps.
Stainless steel 3/8" BSP or 1/2" BSP connection. The accumulator tank features a Butyl membrane for liquid foodstuffs. It operates at a max. working pressure of 10 bar.
Also referred to as an expansion tank, this 0.5 litre model is ideal for fresh water circuits where a faster reaction is required when operating taps, showers or other outlets. The tank can also extend the life of the water pump, requiring it to work less frequently when small amounts of water are called for. The polished stainless steel finish is ideal for marine application.
SKU
165080**
From £75.35 £62.79
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Low voltage fitting, voltage below 50V.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling installation.
Classified under photobiological risk group EN 62471
Product suitable for interior installation only
IP43 front, IP20 recessed element.
Suitable for use both indoors and outdoors
Product Drawing
Please select the desired voltage from the drop-down menu above in order to view product specific information.
| Diameter (mm) | 9.5 |
|---|---|
| Membrane | Butyl (max 70°C) |
| Air Pressure | 1 bar |
| Max. Working Pressure | 10 bar |
| Tank Capacity (Litres) | 0.5 L |
| Material | AISI 304 Stainless Steel |
| Weight (kg) | 0.560000 |
| Manufacturer | Marco |
Check items to add to the cart or
