M5 1,500 Watt 5-Channel Element Ready™ Amplifier

Skip to the beginning of the images gallery

M5 1,500 Watt 5-Channel Element Ready™ Amplifier

The M5-1500X5 amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by splash guards on both ends and heavy-duty moulded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD/BD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.

Simply put, this is the most advanced true marine-grade amplifier available on the market.

SKU

RF-M5-1500X5

Regular Price £1,237.52 Special Price £866.27 £721.89

Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.

Element Ready™ design with integrated harness & panel seals
PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
Play all day, easy to integrate, and keep music playing for extended lengths of time
C.L.E.A.N. input/output clip detection and indicator LEDs
Constant Power provides instantaneous delivery of output over varying impedance loads
Focused mass heat sink allows critical aluminium material to be located around hottest internal devices
Top mounted control panel with Element Ready™ smoked lens cover
OEM and aftermarket radio integration inputs
Low Impedance Stability
Proprietary testing using RATS (Rockford Automated Testing System)
Proprietary Class-AD technology allows amplifier to produce more power with less current draw
Class-BD technology provides 75-80% efficiency over traditional class A/B designs
Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
Balanced Differential Inputs eliminates noise picked up by signal cables
Remote-Out feature when using high level inputs
2-Year Warranty

More Information
Weight (kg)	2.900000
Manufacturer	Rockford Fosgate
Finish	Black
Number of Channels	5
Total Power (Sum of Rated Power)	1500 Watts
Rated Power (RMS Continuous Power)	100 Watts x 4 @ 4-Ohm + 400 x 1 @ 4-Ohm 100 Watts x 4 @ 2-Ohm + 600 x 1 @ 2-Ohm N/A + 600 Watts x 1 @ 1-Ohm 200 Watts x 2 @ 4-Ohms Bridged + N/A
Bridgeable	Yes. Front Terminals: Left (+) Right (-) Rear Terminals: Left (+) Right (-)
Input Sensitivity	150 mV to 12 V
Speaker Outputs	No
Circuit Topology Class	Class AD + Class BD (Sub)
Efficiency	>75%
Signal Input	Low level: 2 RCA, High Level: 4-Pin Molex
Tone Controls	Front/Rear Treble: 0 to +14dB @ 12.5kHz (HP mode) Front/Rear Bass: 0 to +18 dB @ 45Hz (LP mode) Sub: 0 to +18 dB @ 45Hz
Crossover Controls	High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth, Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth, Infrasonic: 30Hz @ 12dB/Octave Butterworth
Visual Indicators	Power: Blue, Protect: Red, Input Clip: Red, Output Clip: Blue/Red
Power Wire Gauge	4 AWG
Power Input Connector	Compression Terminal Block
Speaker Wire Gauge	16 AWG
Speaker Output Connector	4-Pin Molex
Cooling	Convection
Steering Wheel Control Ready	No
Multi-Function Display Compatible	No
Sirius XM Ready®	No
iPod / iPhone Compatible	No
AUX Input	No
Pandora Internet Radio	No
Clock	No
Input Voltage	9 - 16 Vdc
IP Rating	IPX6
EAN Barcode	780687357979

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

Class AD

This technology allows the amplifier to produce more power with less current draw from the vehicle's charging system.

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

Constant Power

Constant Power is a patented circuit topology that provides instantaneous delivery of output power over varying impedance loads.

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

3-Stage Airflow

P.O.W.E.R

Power supply circuit design that allows the amplifier to increase output power as voltage increases..

C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to the amp and optimise output.

DSM

DSM utilises 1% tight-tolerances improving the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.