The PM1000X5 is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications.
The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current and short circuits.
|Number of Channels||5|
|Total Power (Sum of Rated Power)||1000 Watts|
|Rated Power (RMS Continuous Power)||75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm|
|Bridgeable||Yes. Front Terminals: Left (+) Right (-) Rear Terminals: Left (+) Right (-)|
|Input Sensitivity||150 mV to 12 V|
|Power Output||CEA-2006 Power Rating 75Wx4 + 150Wx1 @ 4Ω ≤1.0% THD+N|
|Circuit Topology Class||Class A/B + Class BD (Sub)|
|Efficiency||Front/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm|
|Signal Input||Input Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch|
|Tone Controls||Sub: 0 to +18 dB @ 45 Hz|
|Crossover Controls||Front: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave|
|Visual Indicators||Power/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD|
|Power Wire Gauge||4 AWG|
|Power Input Connector||Block|
|Speaker Wire Gauge||12 AWG|
|Speaker Output Connector||Block|
|Steering Wheel Control Ready||No|
|Multi-Function Display Compatible||No|
|Sirius XM Ready®||No|
|iPod / iPhone Compatible||No|
|Pandora Internet Radio||No|
|Input Voltage||9 - 16 Vdc|
|Compatible Remotes||Optional PLC2 provides Punch Level Control|
Element Ready™ - Amps
These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.
Class BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional class A/B amplifiers.
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).
NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to the amp and optimise output.
DSM utilises 1% tight-tolerances improving the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
Engineered In The USA
These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.
Balanced Differential Inputs
Differential inputs eliminate noise picked up by signal cables.
MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.
Dynamic Thermal Management evenly distributes excess heat across the entire amplifier heatsink.
DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.