Powered by the UP6/AC mains voltage water pump and protected by an integrated fuse, the pump system can supply up to 5 faucets at the same time and is suitable for boats up to 60 feet. Extremely compact, this unit is easy to install in the engine compartment.
The UP6/AC pump sits atop of an expansion tank to minimise the installation footprint. The pump features PEEK gears, an in-line filter, pressure switch and non-return valve.






The PEEK gears guarantee constant pressure, heavy duty cycles, lower noise levels and excellent resistance to chemicals. The pump also features a nickel plated brass body and connections, stainless steel shaft, FKM seals and NBR O-rings. The pump is built to last and perform to the highest standard.


| Input Voltage | 220Vac |
|---|---|
| Flow Rate | 28 l/min |
| Pressure | 2.5 bar |
| Liquid Type | Fresh water |
| Power Consumption | 1.7 Amps |
| Motor Power | 550W |
| Fuse | 2.5 Amps |
| Hose Connection | 16mm |
| Ports (BSP) | 1/2" |
| Tank Capacity (Litres) | 20 L |
| Weight (kg) | 13.600000 |
| Manufacturer | Marco |
| EAN Barcode | 8022278607615 |
