UK Delivery Free Over £200

ATX1 Polished Stainless Steel Accumulator Tank, 0.5 Litres

Polished stainless steel accumulator tank for automatic pumps.

 

Stainless steel 3/8" BSP or 1/2" BSP connection. The accumulator tank features a Butyl membrane for liquid foodstuffs. It operates at a max. working pressure of 10 bar. 

Also referred to as an expansion tank, this 0.5 litre model is ideal for fresh water circuits where a faster reaction is required when operating taps, showers or other outlets. The tank can also extend the life of the water pump, requiring it to work less frequently when small amounts of water are called for. The polished stainless steel finish is ideal for marine application.

SKU
165080**
From £75.35 £62.79
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Class III
Low voltage fitting, voltage below 50V.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling installation
Recessed ceiling installation.
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471
Interior Use
Product suitable for interior installation only
IP43 front, IP20 recessed element
IP43 front, IP20 recessed element.
Product for exterior application
Suitable for use both indoors and outdoors

Product Drawing

Please select the desired voltage from the drop-down menu above in order to view product specific information.

More Information
Diameter (mm)9.5
MembraneButyl (max 70°C)
Air Pressure1 bar
Max. Working Pressure10 bar
Tank Capacity (Litres)0.5 L
MaterialAISI 304 Stainless Steel
Weight (kg)0.560000
ManufacturerMarco
Download as PDF Download as PDF