The UP1 220V pump by Marco features a flexible rubber impeller made of nitrile NBR rubber which allows the problem-free transit of small particles (max Ø5mm). This pump is a mains voltage product and ideal for larger yachts where 220V is preferred for a bilge pump solution. It is also equally useable in an industrial application where grey water needs to be transferred. This pump can be applied to any application where small particles of dirt or debris may be found in the water.
The Marco rubber impellerguarantees a high flow rate whilst also allowing the passing of small impurities in waste water. This makes the pumps especially suitable for bilge use on a boat where small debris such as sand and grit may also need to be pumped back overboard. This type of impeller also can handle grey water application.
Available with capacities from 28 litres per minuteup to 45 litres per minute and in versions with an on/off switch or flow reverser switch.
The pumps with flexible rubber impellers are built with a nickel plated brass body and stainless steel shaft, FKM seals and NBR O-rings. They are fitted with a waterproof cable guide and internal brush holder with EMI filter. Pumps comply with ISO 8846 and ISO8849
Low voltage pump shown above for illustration purposes only.
Input Voltage | 220Vac |
---|---|
Flow Rate | 30 l/min |
Pressure | 1 bar |
Liquid Type | Fresh + salt water |
Power Consumption | 3.3 Amps |
Motor Power | 550W |
Fuse | 4 Amps |
Hose Connection | 25mm |
Ports (BSP) | 1/2" |
Weight (kg) | 7.840000 |
Manufacturer | Marco |
EAN Barcode | 8022278603174 |