Powered by the UP6/AC mains voltage water pump and protected by an integrated fuse, the pump system can supply up to 5 faucets at the same time and is suitable for boats up to 60 feet. Extremely compact, this unit is easy to install in the engine compartment.
The UP6/AC pump sits atop of an expansion tank to minimise the installation footprint. The pump features PEEK gears, an in-line filter, pressure switch and non-return valve.






The PEEK gears guarantee constant pressure, heavy duty cycles, lower noise levels and excellent resistance to chemicals. The pump also features a nickel plated brass body and connections, stainless steel shaft, FKM seals and NBR O-rings. The pump is built to last and perform to the highest standard.


| Input Voltage | 220Vac | 
|---|---|
| Flow Rate | 28 l/min | 
| Pressure | 2.5 bar | 
| Liquid Type | Fresh water | 
| Power Consumption | 1.7 Amps | 
| Motor Power | 550W | 
| Fuse | 2.5 Amps | 
| Hose Connection | 16mm | 
| Ports (BSP) | 1/2" | 
| Tank Capacity (Litres) | 20 L | 
| Weight (kg) | 13.600000 | 
| Manufacturer | Marco | 
| EAN Barcode | 8022278607615 | 
