Apply Discount Code
UK Delivery Free Over £200
Prometeo II Double Spotlight
The Prometeo spotlight range contains some of our most advanced LED technology. The Prometeo II double spotlight is the largest of the Prometeo family and features a powerful 6.5 watt LED module. The Nichia™ LED chip produces a very high quality LED output with an average colour rendering index of 95. The spotlight is waterproof from both the front and rear and is available in various lens angles and colour temperatures.
- Interior & exterior spotlight with stainless steel bezel
- Double spotlight housed in a single bezel
- Excellent anti-glare properties with recessed LED source
- Galvanised brass face, chrome plated
- Custom finishes available on request
- Tempered glass lens
- Anodised aluminium heatsink
- Multiple lens angles available
- Available in numerous white colour temperatures as well as red
- CRI>90
SKU
5183.2.SSLED*
From £283.08 £235.90
Low voltage fitting, voltage below 50V.
Dust tight, protected against water jets.
Classified under photobiological risk group EN 62471
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling and wall installation.
Suitable for use both indoors and outdoors
 | Heat Dissipation-Heat dissipation is key to the performance and longevity of LED lighting. Our Power LED modules have been carefully designed to ensure that the heat is taken away from the LED chips and dissipated through the incorporated heat sink designed into the product housing. Circuit board temperatures are closely monitored during the development phase of each product and appropriate heat dissipation can then be accurately calculated to ensure that product will continue to perform for many years.
|
Power Regulator-The 10-30Vdc power regulator is always a remote item on the power cable of the fitting. This offers numerous advantages over alternative methods used by competitor brands. Keeping the power regulator separate reduces heat build-up on the LED circuit board and therefore increases performance and longevity of the LEDs. Remote regulators can also be easily removed so that the product can be powered directly with the correct amperage, very useful for integration in some mains voltage applications.
|  |
 | Anti-glare Design-The LED chips are positioned deep within the body of the fitting. This helps to minimise glare and ensures that you see the effect of the light, not the source.
|
Not All Cones Are Equal-A choice of lens angles is available for this product which means that the perfect output can be selected for any given project. Selecting either standard, medium or narrow lenses can have a large effect on the overall lighting effect.
|  |
Photometric data shown below for single unit with 39° lens angle:
| Weight (kg) | 0.300000 |
|---|---|
| Manufacturer | Foresti & Suardi |
| Installation | Recessed |
| Light Element Type | Power LED |
| Lux Level at 1 Metre | 589 (single unit) |
| Lumens | 354.00 (single unit) |
| Lumens Per Watt (Lm) | 54.46 (single unit) |
| Wattage | 6.5W x2 |
| CRI | >90 |
| Input Voltage | 10-30Vdc |
| IP Rating | IP65 |
| Dimmer | Yes |
| Bezel Size (mm) | 170.00 x 70.00 |
| Cut-out Size (mm) | 128.00 x 58.00 |
| Depth (mm) | 45.00 |
| Finish | 316 Stainless Steel |
