Installation Cup For Pyxis Small Courtesy Lights
This simple cup aids the installation of the Pyxis Small LED courtesy lights. The LED courtesy lights are designed to be installed in a pressure fixing method. In essence, the cut-out hole for the installation of the luminiare must be accurately made so that the fitting pushes into the recess and is held in place thanks to the pair of O'rings that feature in the body of the product. This installation cup can be bonded in place or, in the case of installation into GRP, can be set into the fiberglass during manufacture. With the use of the installation cup, the water tightness of the installation can be guaranteed. Future maintenance is also much quicker as the luminaire can be simply and easily pulled out of the cup and pushed back in place.
- Solid brass cup with a chrome plated finish
- Designed for use with the Pyxis Small LED courtesy lights
SKU
CUP.5610C
Angle of light output can be manually adjusted.
Low voltage fitting, voltage below 50V.
Dust tight, protected against water jets.
Classified under photobiological risk group EN 62471
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling and wall installation.
Suitable for use both indoors and outdoors
Please select the desired version from the drop-down menu above in order to view product specific information.
| Weight (kg) | 0.030000 |
|---|---|
| Manufacturer | Foresti & Suardi |
| Dimmer | No |
| Cut-out Size (mm) | Ø10.50 |
| Finish | Chrome |
Download as PDF
