UK Delivery Free Over £200

Punch Marine 1,000 Watt Class-bd 5-Channel Amplifier

The PM1000X5 is a 1000 Watt 5-channel amplifier with high dynamic power using Class-a/b technology on the front/rear channels, Class-bd for the subwoofer channel, and a conformal coated pc board designed for motorsport and marine applications.

SKU
RF-PM1000X5
Regular Price £1,234.61 Special Price £864.23 £720.19
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Class III
Low voltage fitting, voltage below 50V.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling installation
Recessed ceiling installation.
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471
Interior Use
Product suitable for interior installation only
IP43 front, IP20 recessed element
IP43 front, IP20 recessed element.
Product for exterior application
Suitable for use both indoors and outdoors

The PM1000X5 1,000 Watt full-range 5-channel is the one-and-only amplifier you will need to run your entire system. Run dash speakers off the front channels, run back speakers off the rear channels and run subwoofer(s) off the 5th channel! Known worldwide for brute power, this amplifier offers a higher level of efficiency along with tri-stage protection that covers thermal, over-current and short circuits.

 

  • High level input capable with Auto Turn-On circuit
  • Features C.L.E.A.N. Set-up
  • Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
  • 12dB/octave Butterworth crossover
  • On-board Punch EQ with +18dB boost @ 45Hz
  • Muted turn on
  • Stealth top mounted control panel
  • Cast aluminum heatsink
  • Short circuit protection
  • Over current protection
  • Infrasonic filter
  • 2/4 channel input switch
  • Marine-grade two part epoxy coating on circuit boards
  • Marine-grade stainless steel hardware
  • 2-Year Warranty
More Information
Weight (kg)6.940000
ManufacturerRockford Fosgate
FinishAnodised Aluminium
Number of Channels5
Total Power (Sum of Rated Power)1000 Watts
Rated Power (RMS Continuous Power)75 Watts x 4 + 150 Watts x 1 @ 4-Ohm 125 Watts x 4 + 300 Watts x 1 @ 2-Ohm N/A + 500 Watts @ 1-Ohm
BridgeableYes. Front Terminals: Left (+) Right (-) Rear Terminals: Left (+) Right (-)
Input Sensitivity150 mV to 12 V
Speaker OutputsNo
Power OutputCEA-2006 Power Rating 75Wx4 + 150Wx1 @ 4Ω ≤1.0% THD+N
Circuit Topology ClassClass A/B + Class BD (Sub)
EfficiencyFront/Rear: 66% @ 4-Ohm Sub Channel: 80% @ 4-Ohm
Signal InputInput Switch: Hi/Low level input Input Switch: 2/4 channel input Hi/Low Level: 3 RCA Pair Sub: front/sub input switch
Tone ControlsSub: 0 to +18 dB @ 45 Hz
Crossover ControlsFront: 50Hz - 250Hz High-Pass @ 12dB/Octave Rear: 50Hz - 250Hz High-Pass @ 12dB/Octave Sub: 50Hz - 250Hz Low-Pass Sub: 28Hz infrasonic filter @ 12dB/Octave
Visual IndicatorsPower/Protect/Thermal LED Input Clip LED3 Output Clip LED1,2,3 LED Color Legend: 1BLUE: <0.5% THD 2VIOLET: 1% THD 3RED: 10%+ THD
Power Wire Gauge4 AWG
Power Input ConnectorBlock
Speaker Wire Gauge12 AWG
Speaker Output ConnectorBlock
CoolingConvection
Steering Wheel Control ReadyNo
Multi-Function Display CompatibleNo
Sirius XM Ready®No
iPod / iPhone CompatibleNo
AUX InputNo
Pandora Internet RadioNo
ClockNo
Input Voltage9 - 16 Vdc
Compatible RemotesOptional PLC2 provides Punch Level Control

 

Element Ready&#8482; - Amps

Element Ready™ - Amps

These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.

Class BD

Class BD

Class BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional class A/B amplifiers.

CEA-2006 Compliant

CEA-2006 Compliant

Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.

CE Compliant

CE Compliant

This product fulfills all essential safety and environmental requirements as defined in the European Directives (768/2008 EC).

 

NOMAD

NOMAD

NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.

 

C.L.E.A.N. Set-Up

C.L.E.A.N. Set-Up

C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to the amp and optimise output.

DSM
DSM

DSM utilises 1% tight-tolerances improving the efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

 

Engineered In The USA

Engineered In The USA

These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

 

 Balanced Differential Inputs

Balanced Differential Inputs

Differential inputs eliminate noise picked up by signal cables.

MEHSA<sup>3</sup>
MEHSA3

MEHSA3 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.

 TRANS&#149;<em>ana</em>

TRANS•ana

Trans•ana is a Class A/B topology that simplifies the signal path of the amplifier allowing the signal to travel through the amplifier at a lower voltage. The result is greater reliability and exceptional sound quality.

 DTM

DTM

Dynamic Thermal Management evenly distributes excess heat across the entire amplifier heatsink.

 DSM

DSM

DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.

  
Download as PDF Download as PDF