Apply Discount Code
UK Delivery Free Over £200
UP3/Oil Gear Pump For Lubricating Oil
Self-priming electric pumps with helical bronze gears for transferring lubricating oils and viscous liquids. Nickel-plated brass body and stainless steel shaft. Particularly suitable for draining engine sumps with the special tubes kit (OK1) and for engines lubricating operations. Now featuring the Marco 'Integrated Flange' which seals the motor for extended life of the brushes and lowering of electrical consumption.
SKU
164020**
From £176.93 £147.44
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Low voltage fitting, voltage below 50V.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling installation.
Classified under photobiological risk group EN 62471
Product suitable for interior installation only
IP43 front, IP20 recessed element.
Suitable for use both indoors and outdoors
Please select the desired voltage from the drop-down menu above in order to view product specific information.
| Flow Rate | d.6= 0.3 l/min, d.8= 1 l/min, d.13= 5.5 l/min |
|---|---|
| Pressure | 2 bar |
| Liquid Type | Oil + diesel |
| Motor Power | 90W |
| Hose Connection | 13mm |
| Ports (BSP) | 3/8" |
| Weight (kg) | 1.670000 |
| Manufacturer | Marco |
