Apply Discount Code
Free UK Shipping over £200!
UP3/AC 230V 50 HZ Gear Pump 10 Litres/Minute
Self-priming electric pump for transferring diesel and viscous liquids. Brass gears, pump body and connections in nickel-plated brass, shaft in stainless steel. Seal in FKM and O-ring in NBR. This pump is a mains voltage product and therefore is suited to larger vessels where a 230V circuit is available.
- Nickel-plated brass body
- Shaft in stainless steel
- Electric motor 150 Watts
- Mains voltage application
SKU
1640011C
£355.93 £296.61
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Low voltage fitting, voltage below 50V.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Dust tight, protected against water jets.
Suitable for use both indoors and outdoors
Classified under photobiological risk group EN 62471
Recessed ceiling and wall installation.
Please select the desired voltage from the drop-down menu above in order to view product specific information.
| Input Voltage | 220Vac |
|---|---|
| Flow Rate | 10 l/min |
| Pressure | 6 bar |
| Liquid Type | Water, oil + diesel |
| Power Consumption | 0.8 Amps |
| Motor Power | 150W |
| Fuse | 2 Amps |
| Hose Connection | 13mm |
| Ports (BSP) | 3/8" |
| Weight (kg) | 4.900000 |
| Manufacturer | Marco |
| EAN Barcode | 8022278603235 |
