Alfa-Cris II Double Spotlight
The Alfa-Cris II spotlight packs a huge amount of technology into a very compact form. The Nichia™ LED chip produces a very high quality LED output with an average colour rendering index of 95. The spotlight is waterproof from both the front and rear and is available in various lens angles and colour temperatures.
- Interior & exterior spotlight with frame-less design
- Excellent anti-glare properties with recessed LED source
- Galvanised brass face, painted
- Custom finishes available on request
- Tempered glass lens
- Anodised aluminium heatsink
- Multiple lens angles available
- Available in numerous white colour temperatures as well as red
- CRI>90
SKU
5231BLKLED*
From £172.16 £143.47
Dust tight, protected against temporary immersion in water.
Product complies with ISO 8846 standards
Product complies with ISO 8849 standards
 | Heat Dissipation-Heat dissipation is key to the performance and longevity of LED lighting. Our Power LED modules have been carefully designed to ensure that the heat is taken away from the LED chips and dissipated through the incorporated heat sink designed into the product housing. Circuit board temperatures are closely monitored during the development phase of each product and appropriate heat dissipation can then be accurately calculated to ensure that product will continue to perform for many years. (Prometeo QRP pictured) |
Power Regulator-The 10-30Vdc power regulator is always a remote item on the power cable of the fitting. This offers numerous advantages over alternative methods used by competitor brands. Keeping the power regulator separate reduces heat build-up on the LED circuit board and therefore increases performance and longevity of the LEDs. Remote regulators can also be easily removed so that the product can be powered directly with the correct amperage, very useful for integration in some mains voltage applications. (Prometeo QRP pictured) | |
 | Simple Frame-less Installation-The separate aluminium backing plate makes installation easy and swift. The backing plate can be screwed to the back side of the installation panel, allowing the frame-less fitting to click into place. (Prometeo QRP pictured) |
Photometric data shown below for single LED fitting (Alfa-Cris I). Please note that Alfa-Cris II is a double LED fitting. Standard 31° lens angle information displayed below, for alternative lens angle data please contact our technical department.
| Weight (kg) | 0.180000 |
|---|---|
| Manufacturer | Foresti & Suardi |
| Installation | Recessed |
| Light Element Type | Power LED |
| Wattage | 6W |
| Input Voltage | 10-30Vdc |
| IP Rating | IP65 |
| Dimmer | Yes |
| Bezel Size (mm) | 70.00 x 36.00 |
| Cut-out Size (mm) | 70.00 x 36.00 |
| Depth (mm) | 50.00 |
| Finish | Black |
Download as PDF