UK Delivery Free Over £200

Click! - Modular LED Strip System

An innovative and effective strip lighting solution.  The Click! modular strip LED system facilitates stunning LED strip designs by using pre-assembled components in various shapes.  Straight lengths, 90° corner pieces, T and X shaped modules are all available. 

At the heart of the Click! system is a 2835 type >90 CRI LED chip with an impressive output.  The modular pieces have been specially designed in order to produce a continous and dot-free light output, with no break in illumination.

  • 24Vdc 2835 LED chip - 220 per metre
  • >90 CRI (Colour Rendering Index)
  • IP20 - for interior use only
  • Opal diffuser
  • Dot-free and continuous illumination
  • Maximum 8 metres continuous run

Please ensure you visit the Click! accessories page to purchase any required connectors, mounting solutions or other parts for a complete installation.

SKU
2835.1213*
From £13.49 £11.24
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Class III
Low voltage fitting, voltage below 50V.
Suitable for inflammable surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling installation
Recessed ceiling installation.
Classified under photobiological risk group EN 62471
Classified under photobiological risk group EN 62471
Interior Use
Product suitable for interior installation only
IP43 front, IP20 recessed element
IP43 front, IP20 recessed element.
Product for exterior application
Suitable for use both indoors and outdoors

Plug & Play

The Click! modular strip LED system is very simple to assemble and install.  End caps can be easily removed with the special tool and junction connectors can then be used to fasten multiple modules together.  With Click!, a vast combination of designs can be brought to life without the need to cut, solder or worry about effective illumination at corners or junctions.

 

Visit our Accessories page to view the available connectors, fixing kits and other Click! essentials.  

Continuous Illumination

The beauty of Click! is the seamless illumination across all junctions and between modules.  The LED chip arrangement means that there is no break in the chip spacing, even at a junction point.  The connectors cleverly feed power to the LED strips using contacts on the rear of the circuit boards, leaving space just for diodes.

Fixing Methods

Click! is magnetic.  Each modular piece has magnetic pieces integrated into the aluminium chassis.  This means that the product can be effortlessly held in place using the magnetic mounting plates.  For those who want added security, a traditional mechanical fixing solution is also available with discreet brackets.

Creative Components

Click! features an excellent choice of components which come together to create your creative lighting design.  

 

L Section - Side Lens

L Section - Top Lens

L Section - Bottom Lens

T Section

X Section

Straight Section - Various Lengths

 

For our range of connectors and accessories, please visit the Click! accessories page

 

 

Wiring Example

 

Drawings

Please see the below technical drawings for each of the component parts.

L Section - Side Lens

L Section - Top Lens

L Section - Top Lens

T Section

X Section

 

  

Video

Plug & Play

The Click! modular strip LED system is very simple to assemble and install.  End caps can be easily removed with the special tool and junction connectors can then be used to fasten multiple modules together.  With Click!, a vast combination of designs can be brought to life without the need to cut, solder or worry about effective illumination at corners or junctions.

 

Visit our Accessories page to view the available connectors, fixing kits and other Click! essentials.  

Continuous Illumination

The beauty of Click! is the seamless illumination across all junctions and between modules.  The LED chip arrangement means that there is no break in the chip spacing, even at a junction point.  The connectors cleverly feed power to the LED strips using contacts on the rear of the circuit boards, leaving space just for diodes.

Fixing Methods

Click! is magnetic.  Each modular piece has magnetic pieces integrated into the aluminium chassis.  This means that the product can be effortlessly held in place using the magnetic mounting plates.  For those who want added security, a traditional mechanical fixing solution is also available with discreet brackets.

Creative Components

Click! features an excellent choice of components which come together to create your creative lighting design.  

 

L Section - Side Lens

L Section - Top Lens

L Section - Bottom Lens

T Section

X Section

Straight Section - Various Lengths

 

For our range of connectors and accessories, please visit the Click! accessories page

 

 

Wiring Example

 

Drawings

Please see the below technical drawings for each of the component parts.

L Section - Side Lens

L Section - Top Lens

L Section - Top Lens

T Section

X Section

 

  

Video

More Information
Weight (kg)0.020000
Light Element TypeSMD LED 12W/m
Lens Angle120°
Depth (mm)13.00
Width (mm)12.50
Height (mm)13.00
Input Voltage24Vdc
IP RatingIP20
DimmerYes
LEDs Per Metre220
CRI>90
Operating Temperature Range (°C)-25 ~ 45 °C
Strip LED TypeRigid Aluminium Profile
Download as PDF Download as PDF