Our neon effect LED strip is the perfect solution for interior or exterior application where a high level of waterproofing is required combined with an excellent light quality. The IP67 rating of the product means that it can be installed in wet locations and is suitable for exterior use. The product is entirely resistant to dust ingress and offers a high level of durability against solvents, saltwater and UV light.
This innovative product is compact at only 10mm x 10mm in section and also offers the best of both worlds in that it can be bent both vertically and horizontally. The 3D Bend 10mm x 10mm strip is a top and side view solution in one. In addition to the 3D bend advantage, this product does away with cut points and instead can be freely cut anywhere. The length remaining illuminates fully regardless of where the strip is cut.
Specification
Vertical and Horizontal Bend
Freely Cut Anywhere Along the Strip
IP67 Rating for Interior and Exterior Application
Sold in 5 Metre Reels
DIY End Caps & Accessories Available
Connector Types
Straight (standard)
Our standard end connector features a straight connection, directly into the end of the strip LED. This connector is supplied with 300mm of cable as standard and is IP67 rated. The opposite end is a simple injection moulded end cap.
When powering lengths that are greater than 5m, a double end connector of this type can be specified to allow a connection at both ends of the product. This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 10m).
Our 5 metre reels sold online feature this standard injection moulded connector at one end.
Actual product may vary from image shown
Right or Left
One option is to have the connection made on either the right or left hand side (right hand side pictured). This connector is supplied with 300mm of cable and is IP67 rated. The opposite end is a simple injection moulded end cap.
When powering lengths that are greater than 5m, a double end connector of this type can be specified to allow a connection at both ends of the product. This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 10m).
Actual product may vary from image shown
Bottom
This connector type emerges from the underside of the strip LED. This is ideal for applications where the end of the strip is visible and the power source is behind the strip. This connector is supplied with 300mm of cable and is IP67 rated. The opposite end is a simple injection moulded end cap.
When powering lengths that are greater than 5m, a double end connector of this type can be specified to allow a connection at both ends of the product. This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 10m).
Actual product may vary from image shown
Accessories
Aluminium U channel in 1 metre lengths or 25mm clips
Transparent plastic channel in 1 metre lengths
Stainless steel flexible U channel in 1 metre lengths