UP1/AC 220V 50 Hz Bilge Pump, Rubber Impeller 30 Litres/Minute

Self-priming electric pump for transfer of fresh or salt water with flexible impeller.

The UP1 220V pump by Marco features a flexible rubber impeller made of nitrile NBR rubber which allows the problem-free transit of small particles (max Ø5mm). This pump is a mains voltage product and ideal for larger yachts where 220V is preferred for a bilge pump solution. It is also equally useable in an industrial application where grey water needs to be transferred. This pump can be applied to any application where small particles of dirt or debris may be found in the water.

Nickel-plated brass body
Shaft in stainless steel
Electric motor 0,55 kW
Ideal for mains voltage bilge application
Ideal for transfer of water with small particles of dirt or debris present

SKU

1620011C

£401.72 £334.77

Details

Product Drawing

Flexible Impeller

The Marco rubber impellerguarantees a high flow rate whilst also allowing the passing of small impurities in waste water. This makes the pumps especially suitable for bilge use on a boat where small debris such as sand and grit may also need to be pumped back overboard. This type of impeller also can handle grey water application.

Available with capacities from 28 litres per minuteup to 45 litres per minute and in versions with an on/off switch or flow reverser switch.

The pumps with flexible rubber impellers are built with a nickel plated brass body and stainless steel shaft, FKM seals and NBR O-rings. They are fitted with a waterproof cable guide and internal brush holder with EMI filter. Pumps comply with ISO 8846 and ISO8849

Low voltage pump shown above for illustration purposes only.

More Information

More Information
Input Voltage	220Vac
Flow Rate	30 l/min
Pressure	1 bar
Liquid Type	Fresh + salt water
Power Consumption	3.3 Amps
Motor Power	550W
Fuse	4 Amps
Hose Connection	25mm
Ports (BSP)	1/2"
Weight (kg)	7.840000
Manufacturer	Marco
EAN Barcode	8022278603174