Apply Discount Code
UK Delivery Free Over £200
UP1 Bilge Pump With Rubber Impeller - 35 Litres / Minute
Self-priming electric water pumps with self-lubricating flexible impeller for prolonged service life and better performance. Nickel plated brass body with stainless steel shaft.
The UP1 is ideal for use for bilge service as the flexible impeller can handle an amount of solids in suspension, up to a maximum size of Ø5mm, but not abrasive particles. This means that the pump will continue to perform even with debris being passed through, thus making the pump suitable for sea water use. It is recommended that an inlet filter is still used when using the pump with fluids containing impurities.
The pump provides a steady, pulse-free flow.
- 12 or 24Vdc pump
- Flexible impeller in NBR material makes it an ideal bilge pump solution
- Pulse-free steady flow
- Fresh or salt water application
- High quality construction from Italian manufacturer Marco
- Patented flange eliminates possible condensation build-up and extends motor life
- Complies with ISO 8846 and ISO 8849
SKU
162002**
From
£184.21
£153.51
Dust tight, protected against temporary immersion in water.
Product complies with ISO 8846 standards
Product complies with ISO 8849 standards
Product Drawing
Flexible Impeller
The Marco rubber impellerguarantees a high flow rate whilst also allowing the passing of small impurities in waste water. This makes the pumps especially suitable for bilge use on a boat where small debris such as sand and grit may also need to be pumped back overboard. This type of impeller also can handle grey water application.
Available with capacities from 28 litres per minuteup to 45 litres per minute and in versions with an on/off switch or flow reverser switch.
The pumps with flexible rubber impellers are built with a nickel plated brass body and stainless steel shaft, FKM seals and NBR O-rings. They are fitted with a waterproof cable guide and internal brush holder with EMI filter. Pumps comply with ISO 8846 and ISO8849
| Flow Rate | 35 l/min |
|---|---|
| Pressure | 1.2 bar |
| Liquid Type | Fresh + salt water |
| Power Consumption | 3 Amps |
| Motor Power | 180W |
| Hose Connection | 25.00 |
| Ports (BSP) | 1/2" |
| Weight (kg) | 2.995000 |
| Manufacturer | Marco |
Check items to add to the cart or
