Our neon effect LED strip is the perfect solution for interior or exterior application where a high level of waterproofing is required. The IP68 rating of the product means that it can even be installed underwater and is safe for swimming pool application. The product is entirely resistant to dust ingress and offers a high level of durability against solvents, saltwater and UV light.
The side view product is flexible in a perpendicular direction to the lens which means that it can be installed in applications where it must follow a certain radius as well as in straight lengths.
Specification
Connector Types
Straight
Our standard end connector features a straight connection, directly into the end of the strip LED. This connector is supplied with 600mm of cable as standard and is IP68 rated. The opposite end is a simple injection moulded end cap.
When powering lengths that are greater than 10m, a double end connector of this type can be specified to allow a connection at both ends of the product. This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 20m).
Right or Left
One option is to have the connection made on either the right or left hand side (right hand side pictured). This connector is supplied with 600mm of cable and is IP68 rated. The opposite end is a simple injection moulded end cap.
When powering lengths that are greater than 10m, a double end connector of this type can be specified to allow a connection at both ends of the product. This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 20m).
Bottom
This connector type emerges from the underside of the strip LED. This is ideal for applications where the end of the strip is visible and the power source is behind the strip. This connector is supplied with 600mm of cable and is IP68 rated. The opposite end is a simple injection moulded end cap.
When powering lengths that are greater than 10m, a double end connector of this type can be specified to allow a connection at both ends of the product. This avoids any voltage drop and ensures that the strip performs perfectly along the entire length (up to 20m).
Jump
A jump connector allows two strip lengths to be connected to one another and keep an IP68 rating. This connector is supplied with 300mm of cable. The opposite end is a simple injection moulded end cap.
Multiples of this connection type are possible when connecting more than two lengths together. The total length of the strips and cable must not exceed 20m if powered from both ends.
Accessories
Aluminium U channel in 1 metre lengths or 50mm clips
Stainless steel 50mm clips
Transparent plastic channel in 1 metre lengths
Stainless steel flexible U channel in 1 metre lengths
Download as PDF
