Silicone Flexible Neon LED Strip IP68 - Top View - 16X15 - Constant Voltage
Silicone flexible neon LED strip with constant voltage chip technology.
This LED neon is made from Dow Chemical SILASTIC™ ET-7021 silicone rubber which has excellent light transmitting characteristics and is very strong. The strip LED emits a seamless light with no dots or shadowing. It is also IP68 rated and resistant to salt, weak acid and alkali corrosion, corrosive gases and UV damage. Importantly, the product is chlorine resistant meaning that it can be used underwater in swimming pool environments.
The strip can be ordered to custom lengths with factory fitted IP68 end connectors for a plug and play installation.
SKU
NFT1615.IP68*
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Low voltage fitting, voltage below 50V.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Dust tight, protected against permenant immersion in water under conditions specified by the manufacturer.
Recessed ceiling and wall installation.
Suitable for use both indoors and outdoors
Download as PDF
A Premium Strip Solution
Constructed from Dow Chemical SILASTIC™ ET-7021 Silicone rubber for excellent light transmission and strength
Environmental protection grade silicone material
Dot-free light output with no hot spots or shadows
IP68 underwater rated, can also be used in swimming pool environments
3 years warranty
Dimensions
Specification
| Voltage | LED Pin Temperature | Storage Temperature | Ambient Working Temperature | CRI |
| DC24V | Max. 65°C | -25°C - 60°C | Min. -25°C Max. 45°C | >90 |
| Power (W/m) | Efficiency (lm/W @4000K) | Max. Run Length (Powered from Single End) |
| 10 | 41.0 | 10 (CV) |
Cable Type
| Cable Type | Image | Specification | Core | Description |
| Rubber |  |
OD 6.3mm | 2 | Brown V+ Blue V- |
| Rubber |  |
OD 6.8mm | 3 |
Dual White: Brown V+, Blue White-, Yellow/Green White- |
| Rubber |  |
OD 7.5mm | 4 |
RGB: Brown V+, Blue Blue-, Yellow/Green Green-, Black Red- |
Multi-use
This silicone neon flex strip LED is suitable for both marine and architectural application.
Single Colour
| CCT | CRI | Voltage (DC) | Power (W) | Lumen (lm/m) | Efficiency (lm/w) | Unit Length (mm) | Max. Run Length* (m) |
| 2400K±150 | >90 | DC24V | 10 | 370 | 37 | 50 | 10 |
| 2600K±150 | >90 | DC24V | 10 | 370 | 37 | 50 | 10 |
| 3000K±150 | >90 | DC24V | 10 | 375 | 37.5 | 50 | 10 |
| 4000K±300 | >90 | DC24V | 10 | 410 | 41 | 50 | 10 |
| 6100K±400 | >90 | DC24V | 10 | 375 | 37.5 | 50 | 10 |
| Red | - | DC24V | 10 | 174 | 17.4 | 50 | 10 |
| Green | - | DC24V | 10 | 489 | 48.9 | 50 | 10 |
| Blue | - | DC24V | 10 | 89 | 8.9 | 50 | 10 |
| Yellow | - | DC24V | 10 | 178 | 17.8 | 50 | 10 |
| Orange | - | DC24V | 10 | 184 | 18.4 | 50 | 10 |
| Pink | - | DC24V | 10 | 437 | 43.7 | 50 | 10 |
*Max. run figure is a single length powered from one end. If powered from both ends, this length can be doubled.
Tuneable White
| CCT | CRI | Voltage (DC) | Power (W) | Lumen (lm/m) | Efficiency (lm/m) | Unit Length | Max. Run* (m) |
| 2600K±150 | >90 | DC24V | 5 | 200 | 40 | 62.5 | 5 |
| 6100K±400 | >90 | DC24V | 5 | 210 | 42 | 62.5 | 5 |
| 3900K±300 | >90 | DC24V | 10 | 410 | 41 | 62.5 | 5 |
RGB
| CCT | CRI | Voltage (DC) | Power (W) | Lumen (lm/m) | Efficiency (lm/m) | Unit Length | Max. Run* (m) |
| Red | - | DC24V | 3.3 | 54.45 | 16.5 | 83.33 | 5 |
| Green | - | DC24V | 3.3 | 201.3 | 61 | 83.33 | 5 |
| Blue | - | DC24V | 3.3 | 39.6 | 12 | 83.33 | 5 |
| RGB | - | DC24V | 10 | 295 | 29.5 | 83.33 | 5 |
*Max. run figure is a single length powered from one end. If powered from both ends, this length can be doubled.
Factory-fit IP68 End Connectors
In order to preserve the IP68 underwater rating of the neon strip, the end connections are produced at the factory and delivered ready to plug and play. No DIY option is available for this underwater rated IP68 product.
Installation
The LED profile can be insterted into various mounting channels or clips for a clean and durable installation.
 |
 |
 |
 |
 |
 |
 |
 |
More Information
| Weight (kg) | 0.400000 |
|---|---|
| Light Element Type | SMD LED |
| Material | Silicone |
| Lens Angle | 120° |
| Width (mm) | 16.00 |
| Height (mm) | 15.00 |
| Wattage | 10W / Metre |
| Input Voltage | 24Vdc |
| IP Rating | IP68 |
| Dimmer | Yes |
| CRI | >90 |
| Cutting Intervals (mm) | 50.00 |
| Luminous Flux (lm/M) | 370 - 410 |
| Operating Temperature Range (°C) | -25° - +45°C |
| Strip LED Type | Flexible Neon |