Right Line E Rigid LED Strip
Aluminium profile with LED module and a choice of end caps. The product can be specified with a simple end cap or an end cap with an integrated switch. Right Line E is available in 500mm or 1000mm lengths as standard although custom lengths are available on request.
- 19.5W/m or 9.6W/m LED module in either 3200°K or 4000°K
- Opal lens
- Available with 2 different end cap styles
- Aesthetic flange ensures installation is fast and simple
- 8391 version features an integrated switch
- Interior application
- Dimmable and non-dimmable versions (19.5W/m and 9.6W/m)
SKU
8390*
From £64.08 £53.40
Angle of light output can be manually adjusted.
Low voltage fitting, voltage below 50V.
Dust tight, protected against water jets.
Classified under photobiological risk group EN 62471
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
Recessed ceiling and wall installation.
Suitable for use both indoors and outdoors
The Right Line range is no ordinary LED extrusion + LED. Typically manufacturers will use flexible LED tape within extrusions or other similar 'off-the-shelf' products. With Right Line, you are getting a Made In Italy LED circuit board which has been carefully designed with the profile in mind. The output of the circuitry has been carefully calculated, taking into account the heat dissipation characteristics of each aluminium profile, to ensure a long-lasting and high performing strip lighting solution. Custom lengths of each Right Line product are available. Please consider the cutting points listed on the product specification when selecting the correct custom length for any application. The product will be made to order and delivered to the length requested.
| Weight (kg) | 0.250000 |
|---|---|
| Manufacturer | Foresti & Suardi |
| Width (mm) | 23.00 |
| Height (mm) | 13.80 |
| Input Voltage | 24-28Vdc |
| IP Rating | IP20 |
| Dimmer | No |
| Strip LED Type | Rigid Aluminium Profile |
Download as PDF